As I've mentioned before, my Commander is a Series 80 Colt with that little firing pin block doohickey thing. The trigger is also a little stiff than other 1911s I've used. There is some thought from various sources that the doohickey contributes to the stiffness.
The question in my mind now, what do do about it?
Do I take it to the gunsmith to get other parts of the trigger group tuned up and thus improve it that way?
Do I go the big money route and get a whole new slide done up that is missing this feature?
A commenter mentioned that Brownells has parts for swapping out some of the firing pin block stuff that is supposed to help but I can't for the life of me find it on the website.
Or, the most likely route, do nothing, and get used to the trigger as it is. Which isn't really that bad.
People I Hit F5 on all day, hoping for more content...
-
-
TFB Review: DNT Optics TheOne 7-35x56 MRAD Scope - DNT Optics is a new player in the optics space. Most of their lineup focuses on night vision and thermal optics, but they also have a new traditional rifle...4 hours ago
-
Gaetz Goes - Matt Gaetz withdrew Thursday as President-elect Donald Trump’s pick for attorney general amid continued fallout over a federal sex trafficking investigat...10 hours ago
-
The Bad Guys are on a losing streak - Earlier this week we saw a bunch of Russian hackers sentenced to prison, now we see Interpol execute a massive take down of multiple groups of Bad Guys: ...15 hours ago
-
Already WWIII? - Quote of the Day Joe Biden‘s administration has allowed Volodymyr Zelensky to launch American-made missiles into Russia, with allies of both Donald Trump a...15 hours ago
-
-
All Right, That's Enough - Most people agree that Washington, D.C. is a semi-evil clown circus, or at least the parts that the fed.gov lurks in are. They start to disagree when...16 hours ago
-
Should You Change Your Defensive Ammunition During Colder Weather? - Written by: Greg Ellifritz I occasionally get questions from readers about changing their defensive ammo to better defeat heavier winter clothing in the ...17 hours ago
-
P99: The Pistol that Rejuvenated Walther - For a couple decades after World War Two, Walther survived on legacy designs – the PP/PPK and P38 (eventually made with an aluminum frame as the P4) prim...1 day ago
-
Situational Awareness and Positioning (part VI) - Greg Ellifritz included an article I wrote ten years ago in this week’s edition of his Weekend Knowledge Dump. https://www.activeresponsetraining.net/weeke...6 days ago
-
-
Another update - Apparently, comments now must be approved. That has been done. Sorry about all that.1 year ago
-
-
The New Resistance to the 2A - You can see the resistance is shaping up around “sensitive places” doctrine and “good moral character.” I remember seeing a comment from Prof. Adam Winkler...2 years ago
-
For A Friend... - Folks, I'm breaking my over-a-year-long streak of not posting because I have some sad news. Someone that I consider a good friend, Chance over at SayUncle,...4 years ago
-
About Me
10 comments:
I would put a thousand rounds through it before any mods.
I have been shooting my RIA a lot lately and it is smoothing out a lot. Fewer FTFs smoother slide action.
If this gun is for carry or home defense, you want the trigger pull to be "heavy" to avoid accidents with sympathetic grip. If its for competition or just plain fun, I think JB's advice is really good: puts lots of rounds through it before taking it to the gunsmith.
The technique when this solution-in-search-of-a-problem was first thrust upon us was to take the piece to a 'smith with a note "No Series 80 parts included" to cover said 'smith's ass liability-wise.
Struggling mightily to avoid "Told you so"...
Good luck. Shooting a grand or so through the piece is also pretty good advice but won't fix a poor (and completely unnecessary) design...
Hobby gun.
BIG Legal Issue! Mas Ayoob has written in the past that if you have to use your pistol in self-defense, and the local Prosecutor wants to go after your Pro-Gun Butt (that is, if he/she is a Hippie Liberal Commie who wants to be Re-Elected), the fact that you have KNOWINGLY disabled a Factory Installed Safety Devise can be used against you in Court. It's happened a couple of times in the past. Go check out his site and send him an email for details. Remember, Janet Reno was picked to become A.G. because of her Anti-Gun Prosecutions against Cops and Citizens when she was Miami D.A. In fact, she was one of the main reasons Florida kicked off the CCW wave in the 80's. And what was one of the first things she did when she D.C? Batfeieio and Waco ring a bell? Don't take the chance, bro. If you ever have to use it for "Social Purposes", don't mess with the safety. Or turn it into a Hobby Gun, and save it for a Level 4, when TSHTF and ain't no one being Prosecuted anyway.
I don't think that's as big an issue as Les claims. Afterall, my brand new 1911 doesn't have any of those series 80 "safety parts."
I say do what you want to the gun.
http://www.brownells.com/.aspx/pid=13121/Product/1911_AUTO_FRAME_SLOT_BLANK
The new Colt guns with the Series 80 parts don't have the problems we saw when it was first introduced. I've got a 2 yr. old Delta Elite with that stuff and it's hard to tell it from a Series 70 gun.
Best advice is work with it awhile and then see what you think of it. Of course, if you shoot it alot, you may become accustomed to it and then it won't make a bit of difference...
All The Best,
Frank W. James
Trigger time, and decide from there... it's YOUR gun.
You can get replacement parts that are titanium coated which reduce the trigger poundage and smooths things out some. I think Brownells carries the parts. If not I know Midway does.
Post a Comment